SEZAGlobal

Soudal

Soudal manufactures construction chemicals. The catalogue covers sanitary and construction silicones, shower and heat resistant grades, polyurethane and siliconised sealants, gun grade and straw polyurethane foams including fire rated foam, the Fix All and Multibond hybrid adhesive sealants, chemical anchors, membrane and contact adhesives, bitumen sealant, and silicone and label removers.

65 productsFull product range

Browse by category

A sample from featured product groups — see the full range in the list below.

Silicone

Polyurethane Foam

Sealants & Acrylics

Super Glue

All products

Search within this brand or browse by page.

1–24 of 65 · page 1 / 3

About Soudal

Soudal products are listed in the Seza Global catalogue for wholesale supply: silicones, polyurethane and siliconised sealants, polyurethane foams, hybrid adhesive sealants, chemical anchors and cleaners. The weight of the 65 rows here sits in jointing and bonding — the largest groups are silicone, polyurethane foam and sealants.

On the silicone side the choice starts with cure type. Sanitary grades carry a fungicide and belong on bathroom and kitchen joints; construction silicones are formulated for exterior exposure and movement; shower grades go on the glass-to-wall joints that stay permanently damp, and heat (gasket) silicone around engine gaskets and ovens. That aquarium silicone contains no fungicide is not an omission but a requirement: the additive leaches into water and harms livestock.

With sealants, chemistry decides the job. Polyurethane gives high adhesion and movement capability, belongs in facade and floor joints, and takes paint once cured. Siliconised sealant is acrylic-based: paintable, more flexible than pure acrylic, and the material for interior joints and timber frames. Fix All and Multibond are hybrid polymers — adhesive and sealant at once, applicable to damp surfaces and free of isocyanates.

Polyurethane foam divides three ways: gun grade meters its output, so it wastes less and lays neater; straw foam suits one-off jobs; and fire rated foam carries a declared B1 or B2 class for regulated penetrations. Board adhesive foam is made low-expansion so insulation boards can be fixed without waiting on mortar.

Packaging decides cost too: the 280-310 ml cartridge runs in a standard gun and suits occasional work, while a 600 ml foil sausage leaves far less packaging waste for the same volume and costs less per litre, but needs a sausage gun. Sausages for crews working continuously, cartridges for a few units a year.

Some Soudal rows are still being assigned to categories and may not yet appear in the shelves below; the full range is in the complete list further down the page. Send us the article number of anything you cannot find and we will come back with stock and lead time.

Frequently asked questions

  • Do you supply the whole Soudal range?

    Yes, we supply the full Soudal range. Category assignment in the catalogue is still in progress, so some products may not appear in the shelves yet; send us the article number and we will come back with stock and lead time.

  • What is the difference between acetic and neutral cure silicone?

    The by-product released during cure. Acetic silicone releases acetic acid (the vinegar smell), cures fast and belongs on glass and ceramics; it can attack metal, concrete and marble. Neutral cure silicone is non-corrosive and is safe on aluminium, concrete, natural stone and mirrors.

  • How does Fix All differ from ordinary silicone?

    Fix All is a hybrid (SMX) polymer: it works as both adhesive and sealant, applies to damp surfaces and can be painted once cured. Silicone is a sealant only — it will not hold paint and bonds less strongly.

  • Should I buy cartridges or sausages?

    The 280-310 ml cartridge runs in a standard gun and suits occasional work. A 600 ml foil sausage leaves far less packaging waste for the same volume and costs less per litre, but needs a sausage gun — worthwhile for crews working continuously.

  • What is the difference between B1 and B2 fire foam?

    Both are reaction-to-fire classes; B1 indicates the higher performance and is what regulated penetrations require. B2 is for general use.

  • Can sealant be painted over?

    Polyurethane and siliconised sealants take paint, and polyurethane should be fully cured first. Pure silicone will not hold paint, which is why visible joints are matched by colour instead.

  • What shelf life do these products have?

    It is printed on the packaging — typically 12-18 months for silicones and sealants, shorter for polyurethane foam. A product that has been frozen or stored in extreme heat should not be used even within date.

  • How does wholesale purchase and dealership work?

    Send the product list, colour codes and quantities; we return stock, wholesale pricing and lead time together. On pallet quantities we schedule against the production plan.

  • Are the products genuine and warranted?

    Yes. Products ship in their original packaging with the production and expiry dates legible.

  • Do you export?

    Yes. Send the product list and quantities along with the delivery terms you need (EXW, FOB, CIF) and we will price and plan the shipment accordingly.

Live pricing. Real stock. Direct from source.

Approved dealers access wholesale pricing, real-time stock and direct ordering through our B2B portal.